Taint - CLEAN MIXED OLD ALLOY SHEET ALUMINUM
Tabor Shall consist of clean old alloy aluminum sheet of two
or more alloys, free of foil, Venetian blinds, castings,
hair wire, screen wire, food or beverage containers,
radiator shells, airplane sheet, bottle caps, plastic, dirt,
and other non-metallic items. Oil and grease not to total
more than 1%. Up to 10% Tale permitted.
Advertisement
Take - NEW ALUMINUM CAN STOCK
Shall consist of new low copper aluminum can stock and clippings, clean,
lithographed or not lithographed, and coated with clear lacquer but free of
lids with sealers, iron, dirt and other foreign contamination. Oil not to
exceed 1%.
Talc - POST-CONSUMER ALUMINUM CAN SCRAP
Shall consist of old aluminum food and/or beverage cans. The material is to
be free of other scrap metals, foil, tin cans, plastic bottles, paper,
glass, and other non-metallic items. Variations to this specification should
be agreed upon prior to shipment between the buyer and seller.
Talcred - SHREDDED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP
Shall have a density of 12 to 17 pounds per cubic foot (193 to 273 kg/m3).
Material should contain maximum 5% fines less than 4 mesh (U.S. standard
screen size) (6.35 mm). Must be magnetically separated material and free of
steel, lead, bottle caps, plastic cans and other plastics, glass, wood,
dirt, grease, trash, and other foreign substances.
Any free lead is basis for rejection.
Any and all aluminum items, other than used beverage cans, are not
acceptable. Variations to this specification should be agreed upon prior to
shipment between the seller and buyer.
Advertisement
Taldack - DENSIFIED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP
Shall have a biscuit density of 35 to 50 pounds per cubic foot (562 to 802
kg/m3). Each biscuit not to exceed 60 pounds (27.2 kg). Nominal biscuit size
range from 10" to 13" x 101/4" (25.4 x 33 x 26 cm) to 20" x 61/4" x 9" (50.8
x 15.9 x 22.9 cm). Shall have banding slots in both directions to facilitate
bundle banding.
All biscuits comprising a bundle must be of uniform size.
Size: Bundle range dimensions acceptable are 41" to 44" x 51" (104 to 112
cm) to 54" x 54" (137 x 137 cm) to 56” (142 cm) high. The only acceptable
tying method shall be as follows: Using minimum 5/8" (1.6 cm) wide by .020"
(.05 cm) thick steel straps, the bundles are to be banded with one vertical
band per row and a minimum of two firth (horizontal) bands per bundle.
Use of skids and/or support sheets of any material is not acceptable. Must
be magnetically separated material and free of steel, lead, bottle caps,
plastic cans and other plastic, glass, wood, dirt, grease, trash, and other
foreign substances. Any free lead is basis for rejection.
Any and all aluminum items, other than used beverage
